Advanced Telnet
In addition to an EZ Installation Wizard and a Web-based
Management Utility, SMC Networks also gives you the ability to
manage the SMC2870W via Telnet.
All of the settings that are available via the Web-based
Management are also made available in the Telnet session. You
can use the standard Telnet or Hyperterminal programs built into
Windows to manage the SMC2870W. The setup below was done
with Hyperterminal:
1. Open Hyperterminal (if you do not have this program on your
PC, you can install it using your original Windows CD)
2. Choose [Connect using:] TCP/IP (Winsock), enter your
SMC2870W's IP address and use 23 as the Port number.
Press [OK]
Advanced Telnet Configuration
Configuration
51