SMC Networks 2870W - annexe 1 Manual page 23

Using the EZ Installation Wizard
5. You will then be given the option to enable either "Wireless
Bridge" or "Access Point" mode. If you are trying to create a
new 802.11g network for your wireless clients to connect up
to, please select "Access Point" and click [NEXT]. If you are
trying to give an Ethernet-equipped device wireless
connectivity, please select "Wireless Bridge" and click
[NEXT]. If you selected "Wireless Bridge", please go to Step
6. If you selected "Access Point", go to Step 10.
13