W
M
EB
ANAGEMENT
Basic Rate: The highest rate specified is the rate the
Wireless Ethernet Adapter will use when
transmitting broadcast/multicast and management
frames. (Default: 1, 2 Mbps.)
Preamble Type: The access points and client card drivers have a
radio setting for RF Preamble. Enabling it can boost your
throughput. Preamble Type offers a drop-down list with two
options: Long or Short. If you are not sure whether all the clients
and access point radios in your wireless network support the
Short RF preamble, then leave this setting to the default (Long).
Transmit Power: Set the signal strength transmitted from
the access point. The longer the transmission distance,
the higher the transmission power required.
(Default: Super)
Selections - Low, Medium, Normal, High and Super
44