Using Ipconfig - SMC Networks 2671W - annexe 1 Manual

EZ I
NSTALLATION

Using IPCONFIG

1. Click the "Start" button, click "Run" and type "command."
2. Press "OK" and a black command prompt will appear.
3. Type "ipconfig" and press enter.
4. Verify that your IP Address is 192.168.2.xxx. If so, you can
now use the SMC EZ Installation Wizard to configure your
SMC2671W. If your IP Address is completely different, please
go to the "Configuring Your IP Address" on page 25.
10
W
IZARD