SMC Networks 2642W Installation Manual page 19

About
The About tab shows driver and utility version of the SMC2642W
Wireless Compact Flash Card.
Caveat
-Due to WinCE's nature of the rst application at power-on
resuming to that at power-off, if you are stuck at the utility program,
you may use the PDA's reset button to terminate it. And then
activate it again when needed.
-Sometimes, your wireless connection to AP may disconnect for
any reason. You can reset and force a connection request by
going to utility program, then select "Conguration", check
parameters, then select "Apply" to force a re-scan.
-If your device roams to a new AP which is in a different subnet,
you may need to remove and re-insert the Wireless LAN Compact
Flash Card to force an execution of "release and renew" of
an re-assignment of IP address in a DHCP Access Point
environment.
19