Table of Contents
Advertisement
The Chassis is normally supplied with one redundant, hot –
swappable power supply as shown below. The design of the power
system is based around flexibility and maximum redundancy. For
normal operation, one power supply is sufficient to operate with
12 converters fully loaded simultaneously. However, for critical
applications, installing two power supplies is recommended.
During 2-power operation, both power supplies will be switched
on and will share the currant load between them. In the event
that a power supply should fail, the other supply will take 100%
of the load. This will happen instantaneously and will have no
adverse effects on the operation of the Chassis. Similarly, if a
power supply is removed for servicing, it can be switched off and
removed while the Chassis continues to function normally.
The Chassis shown as supplied with one Hot-swappable,
Redundant 75Watt Power Supply
P
OWER
S
UPPLY
11
Advertisement
Table of Contents
