Dell Inspiron G374R Setup Manual page 32

Solving Problems
Two beeps — No RAM detected
• Remove the memory modules, reinstall
one module and restart the computer. If
the computer starts normally, reinstall an
additional module. Continue until you have
identified a faulty module or reinstalled all
modules without an error.
• If available, install memory modules of the
same type in your computer.
• If the problem persists, contact Dell (see
"Contacting Dell" on page 55).
Three beeps — Possible motherboard failure -
Chipset error
Contact Dell (see "Contacting Dell" on page 55).
Four beeps — RAM read/write failure
• Ensure that no special memory module/
memory connector placement requirements
exist (see the Service Manual on the Dell
Support website at support.dell.com).
30
• Verify that the memory modules that you are
installing are compatible with your computer.
For more information about the type of
memory supported by your computer, see
"Specifications" on page 58.
• If the problem persists, contact Dell (see
"Contacting Dell" on page 55).
Five beeps — Real Time Clock failure
Replace the battery.
Six beeps — Video card or chip failure
Contact Dell (see "Contacting Dell" on page 55).
Seven beeps — Processor failure
Contact Dell (see "Contacting Dell" on page 55).
Eight beeps — Display failure
Contact Dell (see "Contacting Dell" on page 55).