Dell Inspiron 1200 Owner's Manual page 80

The computer runs the Pre-boot System Assessment (PSA), a series of
initial tests of your system board, keyboard, display, memory, hard
drive, etc.
• During the assessment, answer any questions that appear.
• If failures are detected during the PSA, write down the error
code(s) and see "Contacting Dell" on page 129.
• If the PSA completes successfully, the following message appears:
"Booting Dell Diagnostic Utility Partition.
Press any key to continue."
NOTE:
been found, run the Dell Diagnostics from your Drivers and Utilities media (see
"Starting the Dell Diagnostics From the Drivers and Utilities Media" on
page 81).
3 Press any key to start the Dell Diagnostics from the diagnostics utility
partition on your hard drive.
4 Press <Tab> to select Test System and then press <Enter>.
NOTE:
on your computer. Selecting Test Memory initiates the extended memory test,
which can take up to thirty minutes or more to complete. When the test
completes, record the test results and then press any key to return to the
previous menu.
5 At the Dell Diagnostics Main Menu, left-click with the touch pad/mouse,
or press <Tab> and then <Enter>, to select the test you want to run (see
"Dell Diagnostics Main Menu" on page 82).
NOTE:
appear and follow the instructions on the screen.
6 After all tests have completed, close the test window to return to the Dell
Diagnostics Main Menu.
7 Close the Main Menu window to exit the Dell Diagnostics and restart the
computer.
80
Troubleshooting Tools
If you see a message stating that no diagnostics utility partition has
It is recommended that you select Test System to run a complete test
Write down any error codes and problem descriptions exactly as they