BALAY 3TS872BE Operating Instructions And Installation page 19

programme starts.
The «lavando» indicator light remains lit
throughout the wash programme selected.
Modifying a selected programme
An incorrect wash programme that has been
selected and started can be corrected in the
following way:
m Turn the programme selector to «stop».
m Set the programme selector to the position
for the required programme. The «push
indicator light comes on.
M
m Press the « » button.
The «lavando» indicator light comes on. The
newly selected programme starts.
Interrupting a wash programme
If you wish to stop a programme already in
progress:
m Turn the programme selector to «stop».
m Turn the programme selector to the
b
«Pump out
positions.
M
The «press » indicator light comes on. Do
not select «Rinse hold
M
m Press the « » button.
The «lavando» indicator light comes on.
B
» or «Spin » programme
L
».
Wash programme end/Taking the
laundry out of the machine
The «fin» indicator light comes on.
m Turn the programme selector to «stop».
If necessary:
m Select an additional programme
(«Pump out
M
«Rinse
»
m Press the «
m When the additional programme selected
has finished, turn the programme selector to
«stop».
Taking the laundry out of the machine
m Close the tap.
m Open the door.
If the door cannot be opened:
Wait 2 minutes (the machine's safety device
is activated) or:
If the «Rinse hold
there will still be water inside the appliance.
Selectan additional programme («Pump out
b
» or «Spin
m Take the laundry out of the machine
! Remove any foreign material and metal
objects (clips, fasteners, coins, etc.) which
may have collected in the drum or rubber
seal. Risk of rusting.
Leave the door open so that air can circulate
inside and dry the appliance.
b B
», «Spin
S
»).
M
» button.
L
» option was selected,
B
») to pump out the water.
» or
19
en