Battery Indicators And Recharge; Power Save Mode - Jabra GO 6470 User Manual

7.6

batteRy indicatoRS and RechaRge

Battery indicators
the headset (and Jabra GO base) indicate the current headset battery level as follows:
- the headset led indicates, among other things, its battery and charging status; see the table above for details.
- while the battery is low, you will hear an audio signal (two quick, low tones) every minute or so in the headset.
- when the headset is paired with a Jabra GO base, you can read the current battery level on the touchscreen.
Recharging the Headset
to recharge your headset battery, do one of the following:
- place the headset in its cradle on the Jabra GO base. see also Section 4.3: Assembling the Jabra GO Base and
Headset.
- place the headset into its travel Charger and connect the charger to power. see also Section 9.3: Charging the
Headset with the Travel Charger.
7.7

PoweR Save Mode

you can choose to put the headset into power save mode. the means that the headset saves power at the
expense of a slightly reduced range.
you can enable / disable power save mode from the Jabra Control Center (it is disabled by default).
Jabra GO 6470 User manUal
40