Daily Use - Calling, Answering And Hanging Up; Headset Controls And Indicators; The Target Phone Concept - Jabra GO 6470 User Manual

6. daily uSe — calling, anSweRing and hanging uP
6.1

headSet contRolS and indicatoRS

The Multifunction Button
the table below summarizes the various gestures recognized by the multifunction button. the terms listed in the
table are often used in this manual when describing how to use the headset. see also Section 7.5: Headset Controls
and Signals for complete details of all headset commands.
Gesture name
tap
double tap
press
long press
Table 2: Gestures for using the headset multifunction button; the terms here are used throughout this manual.
Headset Visual and Audio Indicators
the headset provides status messages using both lights and audio signals. for example, the led lights various
colors to indicate battery level, incoming calls, on/off operations, etc. audio signals tell you when you have
pressed a button, selected a new target phone or changed the volume; in-ear ring tones are also provided.
see Section 7.5: Headset Controls and Signals for complete details.
6.2

the taRget Phone concePt

the target phone is the phone to which the audio link for your (outgoing) call is activated when you tap the
multifunction button (mfb) on the headset or touch the green handset icon on the touchscreen. you can select a
different target phone by touching a phone icon or pressing the headset mfb.
the large foreground phone icon indicates the current target phone.
2
Figure 15: The current target phone is indicated by the large icon on the touchscreen; change the target by touching on
one of the other icons.
the effect of activating the audio link to an idle target phone varies depending on the gesture you use on the
mfb, on your set-up and on the features supported by your phone — for mobile phones you can activate voice-
activated dialing or redial, for desk phones with a hook lifter you lift the handset off-hook, for softphones you can
open the audio link and for some softphones redial.
If you initiate an outgoing call from a mobile- or softphone, the audio link opens automatically when the phone
goes off-hook. this phone-initiated outgoing call does not affect your choice of target phone.
How to make it
tap and release instantly (not longer than 0.8 seconds).
two quick taps (less than half a second between them).
press and hold the button for 1 - 3 seconds.
press and hold the button for 3 - 5 seconds.
1. Current target phone: this large icon indicates the phone to which
you will open a connection if you tap the headset multifunction
button or touch the green handset icon at the bottom of the screen.
Double-tap the headset multifunction button to redial on this
phone (selected mobile and softphones only).
double-tap the headset multifunction button to redial on this phone
(selected mobile and softphones only).
2. Other phones: touch the appropriate icon here to change the
current target phone — or press the headset multifunction button
1
when no call is active.
Jabra GO 6470 User manUal
24