Jabra GN2200 User Manual page 4

1
3
5
7
2
4
6
8
English
1. To adjust the headband so it fits perfectly, just slide the headband into the desired position.
Duo (sound in both ears) can be adjusted on both sides of the headband.
2. When using a monaural headset (sound in one ear), place the T-bar support pad just above
your free ear.
3. When using Duo (sound in both ears), adjust the headband so the receivers are resting
comfortably against each ear.
4. Turn, bend and adjust the flexible microphone boom until you find the optimal position.
The distance between your mouth and the microphone should not exceed 2 cm.
5. To change your headset for sound reception in the opposite ear, hold the receiver in your
left hand and simply rotate the microphone boom over the top of the headband. The
boom automatically stops when it cannot turn any further.
6. Use the clothing clip to keep your headset cord in place.
7. Use the Quick Disconnect connection to leave your phone without taking off your headset.
Your call will not be disconnected; you can continue your call when you reconnect your
headset.
8. To clean or change an earpad, hold the receiver in your left hand and remove the earpad
with your right hand.
3