Stitching Welting Into Seam - Singer 288 Instruction Manual

Stitching welting into seam

1. Attach zipper foot to the right of the needle so that
the bulk of the fabric will fall to the left.
2. Stitch welding to the right side of a single seam
edge; guide the edge of the foot next to the cord but
do not crowd.
3. Place the attached welting over the second seam
edge, and pin or baste together.
4. Place the work underthe needle with the first stitch-
ing on top so that you can use it as a guide.
5. Stitch, this time crowding the foot against the cord.
Singer
288
38