Inside Seams Of Sheer Collars, Facings, And Cuffs; Seam Finishes - Singer 288 Instruction Manual

Inside Seams of Sheer Collars,
Facings, and Cuffs
• Pattern Disc: No. 1
• Stitch Width:
• Needle Position:
• Stitch Length: Between 0 and 1
• Special Purpose Presser Foot
• General Purpose Needle Plate
With a delicate hairline finish, seam allowances that
ordinarily show through can be eliminated.
1. Stitch along seam line.
2. Cut seam allowance away close to the line of
stitching.
3. Turn to the right side, gently roil out curved edges
with thumb and forefinger, and press flat.
Singer
288
• Pattern Disc: No. 1, 2. 37 or 350
• Stitch Width:
• Needle Position:
• Stitch Length: 1 - 3 depending on choice
• General Purpose Presser Foot
• General Purpose Needle Plate
• Trim raw seam edges evenly before stitching.
• Place stitching over the fabric edge.
36

Seam Finishes

to suit fabric
of stitch and fabric