Headset Controls - Plantronics EXPLORER 230 User Manual

Headset Controls

Turn on the headset
Turn off the headset
Answer a call
Reject a call
Make a call
Adjust the volume
7
Press and hold the call control button until the
indicator glows blue. You will hear ascending
tones.
Press and hold the call control button until the
indicator glows red. You will hear descending
tones. When power is off, indicator stays off.
Briefl y press the call control button.
When you receive a call, your phone may ring
before your headset rings. Wait until you hear
the ring in your headset before you press the call
control button to answer the call.
Press the call control button for 2 seconds.
Enter number on your phone, press send, and
the call is automatically transferred to headset; no
need to press call control button.
Briefl y press volume button to increase volume. At
upper limit you will hear two tones. Press again for
lowest volume level. There are fi ve volume levels.
WARNING Do not use headphones/headsets
at high volumes for an extended period of time.
Doing so can cause hearing loss. Always listen
at moderate levels. See www.plantronics.com/
healthandsafety for more information on headsets
and hearing.