NAD T747 Specifications page 3

> S P E C I F I C A T I O N S
Amplifier Section
Power output, Stereo Mode 2 x 110W (ref. 0.08% THD, 8Ω)
IHF dynamic power 8Ω 2 x 140W
4Ω 2 x 200W
Power output Surround Mode 7 x 60W
Total harmonic distortion
at rated power 0.08%
IM distortion at rated power 0.08%
Damping factor, 8Ω >60
Input sensitivity
and impedance 300mV
Frequency response ±0.5dB (ref. 20Hz - 20kHz)
Signal/noise ratio,
A-weighted >100dB (ref. rated power 8Ω)
>90dB (ref. 1W 8Ω)
Tuner Section
AM Band
Tuning range 522kHz - 1620kHz (9kHz steps,
230V version only)
530kHz - 1710kHz (10kHz steps,
120V version only)
Usable sensitivity 60dBµ
Signal/noise ratio 40dB
Total Harmonic Distortion 1.5%
NAD Electronics International reserves the right to change specifications or features without notice. NAD is a registered trademark of NAD Electronics
International. All rights reserved. No part of this publication may be reproduced, stored, or transmitted in any form whatsoever without the written
/ 47kΩ
permission of NAD Electronics International. © 02/09 NAD Electronics International.
www.NADelectronics.com
T 747 AV Receiver
FM BAND
Tuning range 87.5MHz – 108MHz
Usable sensitivity, Mono 10dBµ
Signal/noise ratio, Mono 70dB
Signal/noise ratio, Stereo 65dB
Total Harmonic Distortion,
Mono 0.3%
Total Harmonic Distortion,
Stereo 0.5%
Channel Separation 40dB
RDS decode sensitivity 0.2%
Power Consumption
Idle power 60W
Physical Specifications
Dimensions (W x H x D)
Gross 435 x 167 x 394mm
17 1/8" x 6 9/16" x 15 1/2"
Shipping 555 x 266 x 465mm
21 7/8" x 10 1/2" x 18"
Net weight 13.3 kg (29.32 lbs)
Shipping weight 16.2 kg (35.7 lbs)
* Gross dimensions include volume knob / speaker terminals / connectors /
feet. Note: Installers should allow a minimum clearance of 2- 4 inches for
wire/cable management.