Adjustments Before Operations - Aiwa NSX-D70 Operating Instructions Manual

ADJUSTMENTS BEFORE OPERATIONS

En
Power
Turning the unit on
Press POWER 6 STANDBY/ON (POWER on the remote
control).
Turning the unit off
Press POWER 6STANDBY/ON again.
The unit goes into standby.
8
Volume
Turn VOLUME (Press VOLUME +, - on the remote
control).
Adjust from 0 (minimum) to 40 and MAX (maximum).
Tip:
Volume level setting is retained during power-off standby. If
the unit is turned off with the volume set to 27 or more, it is
automatically turned down to 26 the next time the unit is turned
on.
Dial Function
Turn the Dial Function to select a function (TAPE, TUNER,
VIDEO/AUX or CD).
The red light beside the selected function turns on.
DEMO
If the clock has not been set, a DEMO appears on the display
when the unit is turned off.
To deactivate and activate the DEMO
Press DEMO/ECO when the unit is turned off.
Spectrum analyzer display
You can change the spectrum analyzer display.
Press MODE twice and then within 4 seconds turn
MULTI JOG to select one of the three spectrum
analyzer displays.
On the remote control, press SHIFT+DISPLAY repeatedly.
- NORMAL: Displays the fluctuation from low frequencies to
high ones
- BASS: Displays the fluctuation of low frequencies only
- LEVEL: Displays the fluctuation of the average of all the
frequencies.