Parts And Controls - Aiwa NSX-D70 Operating Instructions Manual

PARTS AND CONTROLS

Main unit: rear
1 AM LOOP, FM 75 Ω terminals
Plug in the supplied AM and FM antennas here.
2 VIDEO/AUX jacks
Accepts analog sound signals from external equipment.
Connect using an optional connecting cable with RCA
phono plugs (red plug to R jack, white plug to L jack).
Refer also to the operating instructions of your equipment.
To switch function to external input, turn the Dial Function
(see "ADJUSTMENTS BEFORE OPERATIONS" ) to select
the VIDEO/AUX function.
Tip:
To change the displayed name for this function, select
the VIDEO/AUX function, then hold down ENTER and
press POWER on the unit. Repeat the procedure to select
"AUX", "VIDEO" or "TV".
3 SPEAKERS3 terminals
Connect the speaker cord of the supplied front speakers
here.
4 AC power cord
Dynamic Integrated Neo Amplifier
is a brand-new amplifier system where clear mid-to-high range
frequency sound, as well as rich low frequency sound, can be
reproduced and listeners can enjoy the close-to-original sound
with less distortion at either high or low volume levels.
En
5