NAD C275BEE Datasheet page 3

> S P E C I F I C A T I O N S
Overall Specifications
Fixed IN, Speaker OUT
Continuous output power into 8Ω
and 4Ω (both channels driven)
Continuous output power into 8Ω
(Mono, Bridge mode)
Rated THD (250mW to
rated power, CCIF IMD,
DIM 100)
Clipping power (4Ω and 8Ω)
IHF dynamic power 8Ω
4Ω
2Ω
IHF dynamic power
(Bridge mode) 8Ω
4Ω
Peak output current
Signal/Noise ratio
Damping factor
Frequency response
Input impedance (Fixed IN)
Input impedance (Variable IN)
> R E A R L I N E D R A W I N G
C 275BEE Stereo Power Amplifier
>150W (ref. rated THD,
20Hz – 20kHz)
>330W (ref. 20Hz - 20kHz,
<0.02% THD)
<0.008% (ref. 20Hz - 20kHz)
>170W (ref. 1kHz 1% THD)
250W
410W
600W
800W
1200W
>50A (ref. 1Ω, 1ms)
>102dB (A-weighted, ref. 1W)
>123dB (A-weighted, ref. 150W)
>180 (ref. 8Ω, 50Hz and 1kHz)
± 0.1dB (ref. 20Hz - 20kHz)
3Hz - 100kHz (ref. -3dB)
10kΩ + 200pF
100kΩ + 100pF
Input Sensitivity
Voltage gain
Minimum input level for
AUTO TRIGGER
Time to power OFF at
no signal in AUTO mode
Power Consumption
Normal operation
Standby power
Idle power
Dimension and Weight
Dimensions (W x H x D)
Net
Gross
Net weight
Shipping
weight
* Gross Dimensions include feet, front panel button and extended speaker terminals.
Note: Installers should allow a minimum clearance of 2- 4 inches for
wire/cable management.
1.2V (ref. rated power)
29dB
10mV at 1kHz
<10 minutes
312W (ref. 230V AC 50Hz;
120V AC 60Hz)
<1W
<100W
435 x 133 x 352mm
17 1/8" x 5 1/4" x 13 3/4"
435 x 150 x 396mm
17 1/8" x 6" x 15 3/8"
32.2 lbs (14.6 kg)
37.3 lbs (16.9 kg)