Getting Started; Unpacking And Setup; Choosing A Location - NAD C165BEE Owner's Manual

UNPACKING AND SETUP

what'S in the box
Packed with your C 165BEE you will find:
• The SR 8 remote control with 2 (two) AA batteries
•
This owner's manual
• A detachable AC power cord
Save the packaging
Please save the box and all of the packaging in which your C 165BEE
arrived. Should you move or otherwise need to transport your C 165BEE,
this is by far the safest container in which to do so. We've seen too many
otherwise perfect components damaged in transit for lack of a proper
shipping carton, so please: Save that box!

chooSing a location

Choose a location that is well ventilated (with at least several inches to
both sides and behind), and that will provide a clear line of sight, within
23 feet/7 meters, between the C 165BEE's front panel and your primary
listening/viewing position. This will ensure reliable infrared remote control
communications. The C 165BEE generates a modest amount of heat, but
nothing that should trouble adjacent components. It is perfectly possible to
stack the C 165BEE atop other components, but the reverse usually should
be avoided.
noteS on inStallation
Your NAD C 165BEE should be placed on a firm, level surface. Avoid
placing the unit in direct sunlight or near sources of heat and damp. Allow
adequate ventilation. Do not place the unit on a soft surface like a carpet.
Do not place it in an enclosed position such a bookcase or cabinet that
may impede the air-flow through the ventilation slots. Make sure the unit is
switched off before making any connections.
The RCA sockets on your NAD C 165BEE are colour coded for convenience.
Red and white are Right and Left audio respectively.
Use high quality leads and sockets for optimum performance and reliability.
Ensure that leads and sockets are not damaged in any way and all sockets
are firmly pushed home.
If the unit is not going to be used for some time, disconnect the plug from
the AC socket.
Should water get into your NAD C 165BEE, shut off the power to the unit
and remove the plug from the AC socket. Have the unit inspected by a
qualified service technician before attempting to use it again.
do not remove the cover; there are no uSer-Serviceable
partS inSide.
Use a dry soft cloth to clean the unit. If necessary, lightly dampen the cloth with
soapy water. Do not use solutions containing benzol or other volatile agents.
INTRODUCTION

getting Started