1
MULTIFUNCTION DIGITAL
COMPUTER
IE 50
IE 361
Using the MODE joystick (2)
Using the MODE joystick (2) on handlebar
right side, it is possible to choose various
functions in sequence; move the MODE
joystick (2) to the right or to the left
(UP/DOWN) to scroll the functions, select
the function by pressing rapidly, confirm
data by pressing for a longer period.
Multifunction indicator functions
Move the UP/DOWN joystick (2) to display
the sequence of the various functions:
T R I P
1
T R I P
2
VOLTAGE
CHRONOMETER
TRIP1 - TRIP2 functions
The two pages display two stored values
for: trip meter, average speed, maximum
speed. The values can be reset by holding
down the MODE joystick (2) for a certain
time.
Battery Voltage function
Battery voltage is displayed
Chronometer function
Quickly press the MODE joystick (2) to
start the chronometer.
If the MODE joystick (2) is pressed before
1 0 s e c o n d s h a v e e l a p s e d s i n c e
B A T T E R Y
chronometer start, current measure is
MENU
cancelled and a new one is started.
If the MODE joystick (2) is pressed after 10
seconds have elapsed since chronometer
start, current measure is stopped, stored
and a new one is started.
Hold down MODE joystick (2) for a certain
time to stop the measurements.
It is possible to store up to 16 times in a
r o w , t h a t c a n b e d i s p l a y e d o n t h e
CHRONOMETER screen under the Menu
function (see "Menu Function").
Menu function
Press the MODE joystick (2) for a certain
time to enter the Menu. Press again the
2
M O D E j o y s t i c k ( 2 ) t o a c c e s s t h e
SETTINGS and CHRONOMETER sub-
menus.
SETTINGS - Press again the MODE
joystick (2) to access the following sub-
menus: "Time setting", "Code change" and
"Language setting":
– Time setting: (from the SETTINGS menu)
briefly press on MODE joystick (2) to enter
the setting function. Set the time using the
UP/DOWN joystick (2), confirm it with the
MODE joystick (2). Using UP/DOWN
joystick (2) shift to minutes, confirm the set
value with the MODE joystick (2).
– Code change: (from the SETTINGS menu)
shortly press on the MODE joystick (2) to
enter the function for setting the 5-digit
safety code. Set the first digit using the
UP/DOWN joystick (2), confirm it with the
MODE joystick (2). Then set the following
digit.
31
use and maintenance SR 50