30
Fig. 26
Fig. 27
CHANGING THE COOLANT (Fig. 27-28)
To change the coolant (every 2 years):
Remove the radiator filling plug (Fig. 27).
Remove the expansion tank plug (Fig. 26).
Put a container, with at least 1,5
the drain screw (Fig. 28).
Unscrew the drain screw, thus draining the circuit
completely.
Disconnect the small pipe that joins the expansion
tank to the radiator and drain the expansion tank
completely.
Screw and tighten the drain screw.
Connect the small pipe.
Top up the system with 0,9
CANT CHART") through the radiator filler.
Check the level in the expansion tank (between 1/
4th and 3/4ths of the capacity of the expansion
tank itself); top up if necessary.
a
Be careful not to confuse the oil mixer
tank with the expansion tank.
l
capacity, under
l
of fluid (see "LUBRI-