APRILIA RSV MILLE - 2002 Manual page 21

SETTING THE INSTANTANEOUS,
MAXIMUM AND AVERAGE SPEED
(LEFT DISPLAY)
NOTE
Two seconds after the vehicle
has started moving, the instantaneous
speed is automatically shown on the dis-
play, even if a different function is set.
When the ignition key is rotated to position
"B", the instantaneous speed (9) and the
partial number of kilometres covered "trip
1" (10) appear on the left display.
Resetting "trip 1" (10): with the odometer set
on the instantaneous speed function, press
the push button S for about two seconds.
◆
To display the maximum speed (14) and
the distance "trip 1" (10), press the push
button U for about one second. The
writing "V max" (15), the maximum
speed (14) and the distance "trip 1" (10)
are displayed.
Resetting the maximum speed (14): with
the odometer set on the "V max" function,
press the push button S for about 2 sec-
onds.
NOTE
The measurement of the maxi-
mum speed is relevant to the distance cov-
ered from the last setting to zero of the max-
imum speed itself. The distance "trip 1" (10)
shown on the display indicates the number
of kilometres covered from the last setting to
zero, to the distance "trip 1".
◆
To display the average speed (16) and
the distance "trip 2" (17), press the push
button U again for about 1 second.
The writing "AVS" (18), the average speed
(16) and the distance "trip 2" (17) are dis-
played.
Resetting the average speed (16) and the
distance "trip 2" (17): with the odometer set
on the "AVS" function, press the push but-
ton S for about 1 second.
NOTE
The measurement of the average
speed is relevant to the distance "trip 2"
(odometer).
The distance "trip 2" (17) shown on the dis-
play indicates the number of kilometres
covered from the last setting to zero.
If more than 1000 km are covered without
setting "trip 2" to zero, the value of the av-
erage speed will be wrong.
◆
To display the instantaneous speed (13)
and the distance "trip 1" (10), press the
push button U again.
!
use and maintenance RSV mille - RSV mille R
!
21