Removing And Replacing The Front Bezel - Dell POWEREDGE 300 Checking Manual

support.dell.com
4. The power supply bracket has detents to hold the power supply up in one of sev-
eral extended positions, which are especially useful when the chassis is standing
upright.

Removing and Replacing the Front Bezel

The bezel is secured to the front of the chassis by two tabs and two hooks. The tab
release for the bezel is at the top of the computer chassis and can be accessed only
with the computer cover removed (see "Replacing the Computer Cover"). With the
cover removed, release the bezel by pressing the tab release marked with the icon
(see Figure 7-7).
release tab
Figure 7-7. Removing the Front Bezel
While pressing the tab release, tilt the bezel away from the chassis, disengage the
two retaining hooks at the bottom of the bezel, and carefully pull the bezel away from
the chassis.
retaining hooks (2)
Checking Inside the Computer 7-9