Lubricant Chart - APRILIA LEONARDO 125 - 1999 Manual

Engine oil (recommended):
As an alternative to the recommended oil, it is possible to use high-quality oils with characteristics in compliance with or superior to the
CCMC G-4, A.P.I. SG specifications.
Transmission oil (recommended):
As an alternative to the recommended oil, it is possible to use high-quality oils with characteristics in compliance with or superior to the
A.P.I. GL4 specifications.
Fork oil (recommended): fork oil
If you need an oil with intermediate characteristics in comparison with the two recommended products, these can be mixed as indicated
below:
SAE 10W F.A. 5W 67% of the volume, +
SAE 15W F.A. 5W 33% of the volume, +
Bearings and other lubrication points (recommended):
As an alternative to the recommended product, use high-quality grease for rolling bearings, working temperature range -30°C...+140°C,
dripping point 150°C...230°C, high protection against corrosion, good resistance to water and oxidation.
Protection of the battery poles: neutral grease or Vaseline.
Spray grease for chains (recommended):
Brake fluid (recommended):
WARNING
Use new brake fluid only.
Engine coolant (recommended):
WARNING
Use only antifreeze and anticorrosive without nitrite, ensuring protection at -35°C at least.
70
use and maintenance Leonardo 125 - Leonardo 150 - Leonardo 250
SUPERBIKE 4, SAE 5W-40.
F.C., SAE 75 W - 90.
F.A. 5W or F.A. 20 W.
F.A. 20W 33% of the volume.
F.A. 20W 67% of the volume.
CHAIN SPRAY.
F.F., DOT 5 (compatible with DOT 4).
ECOBLU -40°C.
BIMOL GREASE 481 – AUTOGREASE MP.