ZyXEL Communications ZYWALL USG 1000 Support Notes page 99

Based on the VPN configuration parameter table to finish the VPN tunnel configuration and
the VPN status page will brief list the VPN tunnel information like following screen shot after
the VPN setting. The VPN can't be dialed up for testing because the remote ZyWALL USG
didn't setup the corresponding VPN tunnel until now. The test and debug can start only after
both sites' VPN setup is done. Please refer to the ZyWALL5 user guide for detail VPN setting
steps.
There are similar configuration steps for the ZyWALL35 interface and the VPN setup. The
ZyWALL35 WAN and LAN interface are set as follow.
All contents copyright (c) 2007 ZyXEL Communications Corporation.
ZyWALL USG 1000 Support Notes
99