ZyXEL Communications ZYWALL 5 Quick Start Manual page 8

6. Click Advanced. Remove any previously installed gateways in
the IP Settings tab and click OK to go back to the Internet
Protocol TCP/IP Properties screen.
7. Click Obtain DNS server address automatically if you do
not know your DNS server IP address(es).
If you know your DNS server IP address(es), click Use the
following DNS server addresses, and type them in the
Preferred DNS server and Alternate DNS server fields.
If you have more than two DNS servers, click Advanced, the
DNS tab and then configure them using Add.
8. Click OK to close the Internet Protocol (TCP/IP) Properties
window.
9. Click OK to close the Local Area Connection Properties
window.
1. In the computer, click Start, (All) Programs, Accessories and then Command Prompt.
2. In the Command Prompt window, type "ipconfig" and then press ENTER. Your computer's IP address
must be in the correct range (192.168.1.2 to 192.168.1.254) with subnet mask 255.255.255.0 in order to
communicate with the ZyWALL.
Refer to your User's Guide for detailed IP address configuration for other Windows and Macintosh
computer operating systems.
3 Configuring Your ZyWALL
Choose one of these methods to access and configure the ZyWALL. This
Quick Start Guide shows you how to use the web configurator wizards only.
See your User's Guide for background information on all ZyWALL features
and SMT configuration. Click the web configurator online help for screen-
Web Configurator
SMT (System Management Terminal). Access the SMT via:
o Console port using terminal emulation software
o LAN, WLAN, DMZ or WAN using Telnet
ZyWALL 5 Internet Security Appliance
Checking Your Computer's IP Address
specific web help.
7