ZyXEL Communications V500 Series Quick Start Manual page 12

2.2 Set up Your Voice Account
Follow these steps to configure your VoIP account.
1 Press the Menu key, then press 6 to enter the Advanced Setting menu.
2 Press 2 to enter the SIP Configuration menu.
3 If VoIP 1 Configuration does not display Active,
select its entry and press the Active softkey. If
the SIP account is not active, you cannot use it
to make or receive calls.
4 Press 1 to select the SIP 1 Configuration menu. You can configure up to four SIP
accounts on the V500 (see the User's Guide for details).
Enter the information exactly as given to you by your VoIP service provider.
If your VoIP service provider did not give you information to use for any of
the fields in this menu, leave them at their default settings.
The following table describes the fields in this menu.
FIELD
1 Display Name
2 SIP Number
3 SIP Local Port
4 SIP Server Addr This is the IP address of the server your VoIP service provider uses for
5 SIP Server Port
6 SIP Register
Server
V500 Series Quick Start Guide
DESCRIPTION
Choose a name for this SIP account. This name displays in the SIP
account's tab on the V500's LCD screen.
This is your SIP account number. If you have a SIP account like
1234567@voip-provider.com, the SIP Number is 1234567.
This is the port on the V500 used for SIP calls. The default is 5060.
SIP calls.
This is the port on the SIP server used for SIP calls. The default is 5060.
This is the IP address of the server your VoIP service provider uses to
register the V500. If your VoIP service provider did not give you a
specific SIP register server address, enter the SIP Server address
again.
SIP Configuration
1 VoIP 1 Configuration (On)
2 VoIP 2 Configuration (Off)
3 VoIP 3 Configuration (Off)
4 VoIP 4 Configuration (Off)
Select
11
Off Back