ZyXEL Communications V500 Series Quick Start Manual page 11

Hide thumbs Also See for V500 Series:
Table of Contents

Advertisement

1 If you have an IP address to use, select Static
IP (Off) in the Advanced Setting > Network
Setting menu. Press the On softkey to have the
V500 use a static IP address.
The screen displays Static IP (On). Press Select
to enter your information.
2 Use the options in this menu to enter the static
IP address, gateway and DNS information
provided by your Internet Service Provider (ISP)
or network administrator. Press Back to return
to the previous screen.
2.1.3 Get an IP Address Automatically
The V500 is set to get an IP address automatically by default.
1 If you have neither a username and password
nor an IP address to use, select DHCP (Off) in
the Advanced Setting > Network Setting menu.
Press the On softkey to have the V500 use
DHCP.
DHCP allows your V500 to get an IP address
automatically. Press Back to return to the
previous screen.
V500 Series Quick Start Guide
10
Network Setting
1 PPPoE (Off)
2 Static IP (On)
3 DHCP (Off)
Select
Static IP
1 IP Address
2 Default Gateway
3 Subnet Mask
4 1st DNS
5 2nd DNS
Select
Network Setting
1 PPPoE (Off)
2 Static IP (Off)
3 DHCP (On)
Select
Back
Back
Back

Advertisement

Table of Contents
loading

This manual is also suitable for:

V501

Table of Contents