ZyXEL Communications PLA4201 User Manual page 29

Use this screen to configure priority settings for traffic from the powerline adapters on your
network.
Figure 17 Advanced Screen
The following table describes the labels in this screen.
Table 6 Advanced Screen
LABEL
Adapter
Site
MAC Address
Priority
Save
PLA4201 User's Guide
DESCRIPTION
This field identifies which powerline network information is displayed. Different powerline
networks are identified by the Ethernet interface (network card) on your computer which is
connected directly to a powerline adapter. Typically there is only one connection. However, if
your computer has two network cards and both are connected to a powerline adapter, then
you have two powerline networks.
This field displays:
• Local, if it is the PLA4201 directly connected to the computer running the configuration
utility.
• Remote, if it is a powerline adapter in your powerline network but not directly connected
to the computer running the configuration utility.
This is a read-only field which shows the MAC address of the powerline adapter you are
configuring. You can find the MAC address of your PLA4201 displayed on a sticker on the
bottom of your device.
Select a priority setting from the drop-down box for traffic FROM your selected device. The
options, in order of importance, are High, Medium, Normal and Low.
Click this to apply your changes. The new Priority setting is applied to the selected
powerline adapter.
Chapter 4 The Configuration Utility
29