ZyXEL Communications P-335WT Quick Start Manual page 7

• None: Have no wireless LAN security configured. If you do not enable any wireless security on your Prestige,
your network is accessible to any wireless networking device that is within range.
• Basic security: WEP (Wired Equivalent Privacy) encrypts data frames before transmitting over the wireless net-
work. The higher the WEP Encryption, the higher the security but the slower the throughput.
• Extend (WPA-PSK or WPA2-PSK) security: Configure a Pre-Shared Key. Choose this option only if your wire-
less clients support WPA-PSK or WPA2-PSK respectively.
Note: The wireless clients and Prestige must use the same SSID, channel ID and WPA(2)-PSK (if
WPA(2)-PSK is enabled) or WEP encryption key (if WEP is enabled) for wireless communication.
OTIST
• OTIST (One-Touch Intelligent Security Technology) allows your Prestige to assign wireless clients the Pres-
tige's SSID and static WEP or WPA-PSK encryption settings. The wireless client must also support OTIST and
have OTIST enabled.
Auto or No Wireless Security
A Enter a unique name to identify the Prestige in the wireless LAN.
B Leave the default setting. The Prestige and wireless client must use the same channel ID.
C Select a level of wireless security. Choose Auto or None.
D Yes is enabled by default. Select the No radio button and click Next to configure OTIST later.
E The default OTIST Setup Key is "01234567". This key can be changed in the web configurator. Be sure to use
the same OTIST Setup Key on the Prestige and wireless clients.
ENGLISH
7