ZyXEL Communications NSA 210 User Manual page 48

Chapter 2 NAS Starter Utility
Click Configure network setting in the main utility screen to display the
following screen.
Figure 36 NAS Starter Utility > Configure network setting
The following table describes the labels in this screen.
Table 5 NAS Starter Utility > Config
LABEL
NAS Name
Get IP
automatically
from DHCP
server
Assign IP
Manually
Use DNS server
from DHCP
server
Assign DNS
server manually
PPPoE
48
DESCRIPTION
Specify a name to uniquely identify the NSA on your network. You can
enter up to 15 alphanumeric characters with minus signs allowed but
not as the last character. The name must begin with an alphabetic
character (a-z) and is case sensitive.
Select this if the NSA is automatically assigned an IP address from the
ISP or a DHCP server in your network.
Select this if you want to assign the NSA a fixed IP address, subnet
mask and default gateway.
Note: Do not configure an IP address that is already in use in your
network. This results to a network IP address conflict and
makes the NSA inaccessible.
Domain Name System (DNS) is for mapping a domain name to its
corresponding IP address and vice versa. Select this if the NSA is
automatically given DNS information from the ISP or a DHCP server in
your network.
If you were given specific IP address(es) of the DNS server(s), select
this and enter the primary and secondary DNS in the corresponding
fields.
Click this if your Internet connection requires you to enter a user name
and password to connect to the Internet.
NSA210 User's Guide