ZyXEL Communications NBG4115 - V1.0 Manual page 140

Chapter 12 NAT
Table 51 NAT Application (continued)
LABEL
Local Port
Range
Public Port
Range
Server IP
Address
Apply
Reset
Application Rules Summary
#
Active
Name
Local Start/End
Port
Public Start/End
Port
Server IP
Address
Modify
140
DESCRIPTION
Enter the start and end port(s) to be forwarded.
Type the inside IP address of the server that receives packets from the
port(s) specified in the Port field.
Click Apply to save your changes to the Application Rules Summary
table.
Click Reset to not save and return your new changes in the Service
Name and Port fields to the previous one.
This is the number of an individual port forwarding server entry.
This icon is turned on when the rule is enabled.
This field displays a name to identify this rule.
This field displays the port number(s).
This field displays the inside IP address of the server.
Click the Edit icon to display and modify an existing rule setting in the
fields under Add Application Rule.
Click the Remove icon to delete a rule.
NBG4115 User's Guide