Wisp Mode Status Screen - ZyXEL Communications NBG-4615 User Manual
Wireless n gigabit netusb router
Hide thumbs
Also See for NBG-4615:
- User manual (360 pages) ,
- Quick start manual (56 pages) ,
- Specifications (4 pages)
Table of Contents
Advertisement
Connect your computer to the LAN port of the NBG4615.
1
The default IP address of the NBG4615 is "192.168.1.1". If you did not change
2
this, you can use the same IP address in WISP Mode. Open a web browser such
as Internet Explorer and type "192.168.1.1" as the web address in your web
browser.
If you changed the IP address of your NBG4615 while in Router mode, use this IP
address in WISP Mode. The WISP Mode IP address is always the same as the
Router mode IP address.
Note: After clicking Login, the Easy Mode appears. Refer to
the Easy Mode screens. Click Expert mode to see the screens described in the
sections following this.
12.4 WISP Mode Status Screen
Click
Figure 65 Status: WISP Mode
NBG4615 User's Guide
to open the status screen.
Chapter 12 WISP Mode
Section on page 61
for
101
Advertisement
Table of Contents
Troubleshooting
