Quick Setup; Installing Zyxel Netusb Share Center Utility - ZyXEL Communications NBG-4615 User Manual

Chapter 3 ZyXEL NetUSB Share Center Utility
In this example, a USB printer, fax machine, and scanner are all connected to a
USB hub. The hub is in turn connected directly to the NBG4615. Any computer
with a ZyXEL NetUSB Share Center Utility installed on it and which is connected to
the NBG4615's LAN ports can access these devices.
Note: A USB hub attached to the NBG4615 requires its own power adapter.

3.1.1 Quick Setup

This section shows you how to get started using the ZyXEL NetUSB Share Center
Utility.
Install the ZyXEL NetUSB Share Center Utility on each computer connected to the
1
NBG4615.
Connect a USB device to the USB port on the NBG4615.
2
Note: If you are connecting multiple devices to the NBG4615, first connect a USB hub
to the NBG4615 then connect your other USB devices to it.
Run the ZyXEL NetUSB Share Center Utility to display a list of all connected USB
3
devices, then use it to connect your computer to them.

3.1.2 Installing ZyXEL NetUSB Share Center Utility

Before you can access USB devices connected to the NBG4615, you must first
install the ZyXEL NetUSB Share Center Utility on any computer on your LAN to
which you want to allow access to these devices.
Note: In order to properly use the utility with your NBG4615, ensure that the
NBG4615 firmware is version v1.00(BWQ.0) or higher. See
230
To install the ZyXEL NetUSB Share Center Utility:
Insert the disc that came with your NBG4615 into your computer's disc drive.
1
Run the Setup program by double-clicking it and then follow the on-screen
2
instructions for installing it on your computer.
Note: The following operating systems are supported: Windows XP/Vista/7 (32 and
64-bit versions).
28
for information on updating your device's firmware.
Chapter 28 on page
NBG4615 User's Guide