ZyXEL Communications MWR211 - V1.0 Manual page 259

Click OK to save the changes and close the Ethernet Device General
3
screen.
If you know your DNS server IP address(es), click the DNS tab in the
4
Network Configuration screen. Enter the DNS server information in
the fields provided.
Figure 163 Red Hat 9.0: KDE: Network Configuration: DNS
Click the Devices tab.
5
Click the Activate button to apply the changes. The following screen
6
displays. Click Yes to save the changes in all screens.
Figure 164 Red Hat 9.0: KDE: Network Configuration: Activate
After the network card restart process is complete, make sure the
7
Status is Active in the Network Configuration screen.
Using Configuration Files
Follow the steps below to edit the network configuration files and set your
computer IP address.
Assuming that you have only one network card on the computer,
1
locate the ifconfig-eth0 configuration file (where eth0 is the name of
the Ethernet card). Open the configuration file with any plain text
editor.
MWR211 User's Guide
259