Leds - ZyXEL Communications MWR211 - V1.0 Manual

• Back up the configuration (and make sure you know how to restore it).
Restoring an earlier working configuration may be useful if the device becomes
unstable or even crashes. If you forget your password, you will have to reset
the MWR211 to its factory default settings. If you backed up an earlier
configuration file, you would not have to totally re-configure the MWR211. You
could simply restore your last configuration.

1.5 LEDs

Figure 2 Front Panel
The following table describes the LEDs and the WPS button.
Table 1 Front Panel LEDs and WPS Button
LED COLOR
POWER Green
Battery Green
Amber
Red
MWR211 User's Guide
STATUS DESCRIPTION
On The MWR211 is receiving power and functioning
properly.
Slow The MWR211 is booting.
Blinking
Fast The reset button has been pressed longer than 5
Blinking seconds and the MWR211 is being reset to factory
default configuration.
Off The MWR211 is not receiving power.
On The MWR211 is charged.
On The MWR211 is charging.
On The MWR211 is low on battery power.
Blinking The MWR211 is VERY LOW on battery power. If AC
power is not supplied within 10 minutes, the MWR211
will automatically shut down.
20