Dell A920 Owner's Manual page 23

You can load up to:
100 sheets of plain paper
10 envelopes
25 sheets of labels
10 sheets of card stock
10 greeting cards, index cards,
postcards, or photo cards
25 sheets of coated, photo, or
glossy paper
10 transparencies
100 sheets of custom size
paper
25 iron-on transfers
20 sheets of banner paper
NOTE: To avoid smearing ink, remove each transparency or photo from the paper exit tray
before the next one exits the printer. Transparencies and photos may require up to 15 minutes to
dry.
Make sure:
The paper is designed for use with inkjet printers.
• The envelopes are loaded vertically against the right side of the
paper support.
• The stamp location is in the upper left corner.
• The envelopes are designed for use with inkjet printers.
• You squeeze and slide the paper guide to the left edge of the
envelope (as shown).
NOTE: Do not load envelopes with:
• Holes, perforations, cutouts, or deep embossing.
• Metal clasps, string ties, or metal folding bars.
• Exposed flap adhesive.
The labels are designed for use with inkjet printers.
• The card stock is designed for use with inkjet printers.
• The thickness does not exceed 0.025 inches.
The cards are loaded vertically against the right side of the paper
support.
The glossy or coated side faces you.
• The transparencies are designed for use with inkjet printers.
• The rough side faces you.
Your paper size fits within these dimensions:
Width
– 76 to 216 mm
– 3.0 to 8.5 in.
• You follow the loading instructions on the iron-on packaging.
• The blank side faces you.
The banner paper is designed for use with inkjet printers.
Length
– 127 to 432 mm
– 5.0 to 17.0 in.
U s i n g t h e p r i nt e r
13