Folder Selection - LENCO SCD-30 Instruction Manual

Stereo radio mp3/wma/usb/sd/cd player
Table of Contents

Advertisement

PROGRAMMED USB OPERATION
Program mode works in Stop mode
1. Press PROGRAM/MEMORY button. Then, the "00000P:01" will be shown on the display and the first 2 digits will
be flashing.
2. Press "TUNE +/NEXT or TUNE - /BACK" to select the desired folder. After press "PROG" button to confirm the folder,
the 3rd to 5th digits will be flashing.
3. Press "TUNE +/NEXT or TUNE - /BACK" to select the desired track. Then, press "PROG" button to confirm the track
number.
4.
Press "PROGRAM/MEMORY" button again to confirm the setting. The display will show next program number.
5. Repeat the sequence as indicated in 2 to 4 for next program.
6. After all the desired programs have been selected, Press "PLAY/PAUSE" button for playback.
MUTE ON/OFF
MUTE
PRESET EQ
1.
Press MENU button until EQ shown on the display.
2.
Press ENTER to enter EQ setting mode.
3.
Press MENU button to select of the EQ effect will be :
- FLAT -> ROCK -> JAZZ -> CLASSIC -> POP -> FLAT.
4.
Press ENTER button to confirm the setting.
5.
Press STOP button to clear the EQ setting mode.
FOLDER SELECTION
1.
In STOP mode, press BAND/FOLDER button will skip to the next folder.
2.
This operation valid for all media of MP3,WMA and USB operation.
ID3 Display
1.
Press MENU button repeatedly unit ID3 shown on the display.
2. Press ENTER to enter ID3 setting mode.
3. Press MENU to select " ID3 ON " or " ID3 OFF ".
4.
Press enter to confirm.
INTRO
In CD mode, press to play only the first 10 seconds of each track
on the disc.
BBS
1.
Press MENU button repeatedly
unit BASS shown on the display.
2. Press ENTER to enter Bass
Boost setting mode.
3. Press ENTER to select " BASS
ON " or " BASS OFF ".
4.
Press enter to confirm.
The mute on/ off is changed cyclically by pushing MUTE button.
The "mute" mark is on during mute is on.
The mute on is cancelled in case as shown below.
a.
The power is off/on
b.
The Volume is adjusted by the VOL +/- button.
The bass boost on / off is changed cyclically by pushing
BBS button on remote control.
GB 5
USB display

Advertisement

Table of Contents
loading

Table of Contents