Table of Contents
Advertisement
DVD Menu Setting
Press the Setup button on the remote control to open the menu setup function, the TV
screen will display the following figures.
1. SYSTEM SETUP PAGE
1). TV System
Perform adjustment according to different disc applicable for different TV systems,
includes four options: NTSC, PAL, PAL60, AUTO.
2). Screen Saver
This option is used to open or close screen saver program, includes: ON and OFF.
3). Video Output
According to your requirement, you can input different video source. Includes 4 modes:
INTERLACE-YUV, TV-RGB, P-SCAN YPBPR, S-VIDEO.
(1) INTERLACE-YUV : this option can be chosen if Y, Cb, Cr are connected with TV.
TV-RGB : this option can be chosen if Y, Pb, Pr are connected with TV, and the TV is
(2)
switched to TV-RGB.
4). TV Type
Please select the right screen type according to your TV, includes 3 options,
4:3 LB: Mailbox format, the picture data without panoramic and scanning format will be
played in this format.(Fig 1)
4:3 PS: For regular TV, the picture data with panoramic and scanning format will be played
in this format.( The edges on both the left and right are removed) (Fig.2)
16:9 : For wide screen TV, to be played in full size.( Meanwhile, it is necessary to set the
TV to FULL status.) (Fig.3)
As shown above, each screen type is presented by one example.
Such setting will not affect the normal size of the picture data.
-17-
Advertisement
Table of Contents
