Basic Operation - LENCO MDV-6 Instruction Manual

BASIC OPERATION

PREPARATIVE
1). Before turning on, check whether all the connection are correct and reliable. Plug the power
plug into the corresponding power socket.
2). Press Power button on the front panel to turn on.
3). Press Eject button on the remote control or panel to carry the disc tray outside, put the disc
into the tray, press Eject button again, this unit starts to read and play.
MUTE
In play status, If the Mute button is pressed, there will be no audio output, the sound is
eliminated, however the image will still be played normally. Then press the button again or
press Vol.+/- button to exit the mute status, the sound resumes to be its normal status.
STATUS DISPLAY
In play status, press Display button, the TV screen will display the following data:
VCD display: Disc Type, Soundtrack and Gross Track, Mute ON/OFF, Menu ON/OFF,
Repeat ON/OFF, Song Time.
DVD display: Disc Type, Chapter and Gross Chapter for play, Song Time, Language
Channel Mode, Screen Picture Proportion, Angle Status.
SOUNDTRACK SWITCH
In playing VCD, DVCD, press L/R/LANG button to select the multiple output modes such as
Mono L, Mono R, Stereo, etc. Press the button once to switch one soundtrack.
In playing DVD, press L/R/LANG button can select multiple languages for playback. (Only
applies to the discs like DVD recorded in multiple languages.)
FAST FORWARD & FAST BACKWARD
In play status, press Tune-
and fast backward, shown as follows,
FORWARD X 2, FORWARD X 4, FORWARDX 8, FORWARD X 20, PLAY
BACKWARD X 2, BACKWARD X 4, BACKWARD X 8, BACKWARD X 20, PLAY
PREVIOUS & NEXT
In play status, press CH-
CH+ button, the device will skip to the next one.
SUBTITLE SELECTION
When the played DVD disc records multiple subtitles, you can make 7 selection of subtitle by
pressing Subtitle button, they are:
English, German, French, Spanish, Italian, Dutch and Danish.
button or Tune+ , there will be various speeds of fast forward
button, the device will skip to the previous one for play, press
-10-