Menu Setup - LENCO MDV-3 Instruction Manual

MENU SETUP

Examples: setting loudspeaker 5.1CH output
1. Press the Setup button, and the system setting interface will appear on the TV screen.
Press the direction button
in the following figure:
2. press the button
or Play/Enter button to enter the sub directory, then press the
the 5.1CH status, and press Play/Enter for confirmation. Press SETUP to exit.
Example: password/level
1. In the play or stop status, press the SETUP button, and the system setting interface will
appear on the screen. Press the direction button
System Setup as shown in the following figure:
2. Press the direction button
direction button or Play/Enter button to enter the subdirectory, then use the number button
to enter the password(the password upon delivery is 0000 ). Press the Play/Enter button for
confirmation.
3. After finished the setup of password, press the direction button
Rating option. Press the direction button
then press the direction button
device), and press Play/Enter for confirmation. Press the Setup button to exit this setup.
NOTE: If the entered password is wrong, no rating option can be set !
to switch over to the interface for loudspeaker as shown
, to move the cursor to the DOWNMIX option, press the
to move the cursor to the Password option, press the
or Play/Enter button to enter the subdirectory
to switch the cursor to the desired rating(8 ratings for this
- 21 -
button to switch over to
to switch over to the interface for
to move the cursor to
button