Geometric Setting (Vga Mode Only) - LENCO DVT-2201 Manual

TV Function
Geometric Setting (VGA mode)
Press the MENU button once to enter the
main setup menu. Press the ◄ ► button to
select Geometric, and the screen will display
as the figure on the
In the menu, press the OK or ▼ button to
enter the menu. Press the ▲▼ button to
select an item. Press the MENU button to
return to the previous menu.
Press the EXIT button to exit the menu.
Note: the items in the Geometric Setting menu can be set when there is
provided.
Contrast
Press the ▲▼ button to select Contrast and press the ◄► button to adjust the
Brightness
Press the ▲▼ button to select Brightness and press the ◄► button to adjust the value.
Auto Setting
Press the ▲▼ button to select Auto Setting and press the ◄► button to
Phase
Press the ▲▼ button to select Phase and press the ◄► button to adjust the value.
Manual Clock
Press the ▲▼ button to select Manual Clock and press the ◄► button to adjust the value.
Display Adjustment
Press the ▲▼ button to select Display
Adjustment. Press the ◄ ► button to enter
the menu as shown on the right:
In the menu, press the ▲▼ button to select
items.
Press the MENU button to return to the
previous menu. Press the EXIT button to
exit.
right.
- 26 -
a VGA signal
value.
activate auto setting.