View Of Unit
Rear View
Open the back cover on the right side of the unit's rear panel and all the connecting jacks will
appear, as shown on the below figure:
1. VIDEO/S-VIDEO and L/R audio Input
Jacks
To
connect an audio and video/S-Video
signal
source
Video and S-Video share L/R audio jacks
and S-Video
2. SCART Jack
To
connect a SCART signal source.
3. Y/Pr(Cr)/Pb(Cb) and L/R audio Input
Jacks
To
connect a Y/Pr(Cr)/Pb(Cb) signal
source in YPbPr mode.
4. Power Supply Cord
To
connect the power supply.
5. VGA Input Jack
To
connect a VGA signal source in VGA
mode.
6. TV Signal Input Jack
To
connect a TV antenna or analog cable in
TV mode.
7. HDMI Jack
To
connect an HDMI signal source.
- 6 -
in Composite/S-Video mode.
has
the priority.