Advertisement
Live Sound / Club Music
Theater
Rental
House of Worship
•
Stereo Transmitter with patented digital MPX generation
•
Adjustable radio output power of 10, 20, 50 and 100 mW (country dependent)
•
Ultra linear frequency response
•
Premium SNR
•
Reference audio dynamic
•
dbx professional digital signal processing
Low cut, compressor, equalizer and unique binaural room simulations for a natural listening experience
•
Rugged half 19" metal housing diversity receiver
•
Up to 14 pre-programmed frequencies per group
•
PC control optional HUB 4000 Q
SST 4500 IEM
SST 4500 IEM Stereo Transmitter Specifications
Carrier frequency range
Band 1:
Band 3-A:
Band 3-K:
Band 4:
Band 5-A:
Band 5-JA: 797.125 to 805.875 MHz
Switching bandwidth
≤ 30.5 MHz (country dependent)
Output Power
10, 20, 50 and 100mW selectable (country dependent)
Modulation
FM, MPX Stereo
Audio bandwidth
35 – 20 000 Hz (± 3 dB)
T.H.D.
≤ 0.5 %
Audio Inputs
2 x combined XLR balanced / TS ¼" jack sockets unbalanced
Audio Outputs
2 x Loop TS ¼" jack sockets unbalanced
1 x Line TS ¼" jack sockets balanced
Headphones Output
1 x TS ¼" jack sockets balanced
Dimensions
½ 19 inch 1U rack, 200 mm (7.8 in.) × 44 mm (1.7 in.) × 216 mm (8.5 in.)
Net Weight
1070 g (2.36 lbs.)
Standard Accessories
1 UHF antennas, power supply, rack mount kit
Item number:
SST 4500
Architects' and Engineers' Specifications
The stereo stationary transmitter shall operate over a 30 MHz UHF frequency range in one of 7 bands from 500 MHz to 823 MHz. The transmitter shall offer up to
1200 discrete operating frequencies within that band. The transmitter shall provide a rugged half-rack metal case with backlit LC color display. An integrated signal
processor shall provide an adjustable low cut filter, equalizer-, binaural room simulation-, and compressor presets. The transmitter shall provide indicators for
audio input level, gain reduction of compressor/limiter, activated audio-processing blocks, actual transmitting power, device name, frequency group und channel.
Rear panel BNC socket shall allow either the supplied antenna or a complex antenna network to be connected to the transmitter. The transmitter radio output
power shall be software adjustable up to 100mW. The squelch threshold shall be adjustable between –82 and –100 dBm. The transmitter's audio bandwidth shall
be 35 Hz to 20 kHz; S/N 90 dB(A); THD <0.8% at 1 kHz and stereo, mono and dual function shall provided as well as a SR4500 function for a stationary
transmission to a SR4500 receiver. Audio inputs shall comprise a XLR/jack hybrid connector with ±20 dB adjustable input gain. The transmitter shall provide two
1/4" TS jack audio loop outputs for flexible mix setups, a 1/4" TS stereo jack output for line signal and a 1/4" TS stereo jack output for headphones. A RJ11 data
port for connecting HUB 4000 Q communicating with Harman System Architect PC software shall be provided. The transmitter shall provide a lockable DC input
for the supplied 12 V DC power supply. The transmitter shall measure 200 x 216 x 44 mm (W x D x H) and weigh 1070 g. The transmitter shall be the AKG SST
4500 or equivalent.
650.1 to 680.5 MHz
720 to 750.5 MHz
740.1 to 751.9 MHz
759.5 to 789.9 MHz
790.1 to 819.9 MHz
3095H00..
Wireless In-Ear Monitoring System
Wireless In Ear Monitoring System
Band 5-TH:
790.1 to 805.9 MHz
Band 5-IL:
794.1 to 805.9 MHz
Band 7:
500.1 to 530.5 MHz
Band 8:
570.1 to 600.5 MHz
Band 9:
600.1 to 605.9 & 614.1 to 630.5 MHz
Band 9-U:
600.1 to 630.5 MHz
Advertisement
