Download Print this page

Specifications - Sharp LL-M17W1 Operation Manual

Sharp ll-m17w1: operation manual
Hide thumbs Also See for LL-M17W1:

Advertisement

Available languages

Available languages

Product specifications
Model name
LL-M17W1U
LCD display
43 cm measured diagonally TFT LCD module
Resolution (max.)
WXGA 1280 x 768 pixels
Displayable colors (max.)
Approx. 16.19 million colors (6 bit + FRC)
Dot pitch
0.289 (H) x 0.289 (V) mm
Brightness (max.)
260 cd/m
2
(PC mode); 400 cd/m
BALANCE" is set to "WARM" in TV/AV mode)
Contrast ratio
600:1
Angle of visibility
Left-right 170°; Up-down 170°
>
(contrast ratio
10)
=
Screen display size
369.6 (H) x 221.76 (V) mm
Video signal
Analog RGB (0.7 Vp-p) [75Ω]
Sync signal
Separate Sync (TTL level: +/-), Sync on Green,
Composite Sync (TTL level: +/-)
Video signal format
NTSC
Expansion compensation
Digital scaling (Enlarges VGA/SVGA/XGA etc. to
full screen size.)
[Enlarged display (full screen, Fixed aspect
ratio)]
- 1:1 display is not possible.
Plug & Play
VESA DDC1/DDC2B compatible
Power management
VESA: based on DPMS
Speaker output
2.7 W + 2.7 W
Input terminals
Computer signal: Mini D-sub15 pin (3 rows) x 1
Computer audio: Mini stereo jack (φ 3.5 mm) x 1
Video image: RCA pin x 2
Component image: x 1
S-video image: x 1
Audio input terminal: RCA pin (L/R x 2)
Receivable TV channels
VHF: 2 through 13; UHF: 14 through 69;
Cable: 1 through 125
Headphone terminal
Mini stereo jack (φ 3.5 mm)
Screen tilt
Upward approx. 0 - 20°; downward approx. 0 - 5°
Power supply
AC 110 - 240 V, 50/60 Hz (Uses special AC
adapter, type NL-A69J of Sharp Corporation)
g02.P65

Specifications

2
(when "WHITE
63
Temperature of operating environment
5 - 35°C
Power consumption
55 W; 2 W in standby; 2 W in power-saving mode
(Uses special AC adapter)
Dimensions
Approx. 432 (W) x 184 (D) x 373 (H) mm
Weight
Approx. 5.9 kg (excluding signal cable and AC
adapter)
Approx. 5.0 kg (excluding stand)
Dimensions (Units: mm)
432
265
- PC analog signal cable: approx. 1.8 m
- PC audio cable: approx. 1.8 m
- Antenna cable: approx. 4 m
- Special AC adapter:
Approx. 1.5 m
Approx. 150 (W) x 60 (D) x 35 (H) mm
Note:
- As a part of our policy of continuous
improvement, SHARP reserves the right to make
design and specification changes for product
improvement without prior notice. The
performance specification figures indicated are
nominal values of production units. There may
be some deviations from these values in
individual units.
E63
8/22/2003, 6:07 PM
78
184

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Ll-m17w1u