Saving Broadcast Tv Channels In The Memory (Channel Search) - Sharp LL-M17W1 Operation Manual

Saving broadcast TV channels in the
memory (CHANNEL SEARCH)
"CHANNEL SEARCH" allows you to search
through available channels ("AIR" or "CABLE") in
your area.
The tuner saves them to TV memory automatically.
INPUT
MENU
BRIGHT
/
ENTER
MODE
CH
VOL/BRIGHT
MAIN
POWER
1. Turn on the monitor power.
2. Select the TV mode using the INPUT button
(monitor) or the TV button (remote control).
3. Display the MENU screen using the MENU
button.
MENU
VIDEO ADJUST
CHANNEL SETTING
MODE SELECT
CLOSED CAPTION
V-CHIP BLOCK
4. Select "CHANNEL SETTING" using the MENU
button (monitor) or the
control), and press the ENTER/BRIGHT MODE
button (monitor) or the ENTER button (remote
control).
CHANNEL SETTING
RETURN
AIR/CABLE
CHANNEL SEARCH
CHANNEL MEMORY
g01.P65
Setting TV channels
POWER
PC TV AV1 AV2
FREEZE PIP VIEW MODE
SLEEP MENU
ENTER
BRIGHT
BRIGHT
MODE
DISPLAY CC MTS MUTE
VOL
CH
FLASHBACK
< >
TV/AV
>>
>>
>>
>>
>>
buttons (remote
< >
TV/AV
[ AIR ]
>>
>>
23
5. Select "CHANNEL SEARCH" using the MENU
button (monitor) or the
control), and press the ENTER/BRIGHT MODE
button (monitor) or the ENTER button (remote
control).
CHANNEL SEARCH
2
AIR
6. Press the ENTER/BRIGHT MODE button
(monitor) or the ENTER button (remote control).
The tuner will search through all available
channels in your area and save them to the TV
memory.
Note:
- To interrupt Channel Search, press the INPUT
button (monitor) or the MENU button (remote
control). Channel Search will stop at the current
channel and will not save any higher channels.
7. When Channel Search completes, the MENU
screen becomes off and TV screen becomes
minimum channel of TV memory.
If TV memory is empty, TV channel will be CH 2.
Notes:
- Searching channels are:
AIR channels:
VHF: 2 through 13
UHF: 14 through 69
CABLE channels:
1 (HRC and IRC mode only)
2 through 125 (STD, HRC and IRC)
- During Channel Search, the monitor will change
channels automatically.
- When Channel Search completes, all channels,
which were set previously, will be erased.
- If you search for channels but cannot receive
any, TV memory becomes empty.
E23
8/22/2003, 6:02 PM
buttons (remote
< >
TV/AV