Media Box Rear View Connector Definitions - Sceptre X42GV-Naga User Manual

Media Box Rear View Connector Definitions

Signal Connector
1.
This connector provides video signals to the display panel and has to be
permanently connected. This connection uses propriety cable.
2. Inverter Connector
This connector provides power to the display panel and has to be permanently
connected. This connection uses propriety cable.
3. TV Speaker
This connection port is for connecting the TV's speakers and provides sound
signals to the TV's speakers. This connection uses speaker wires.
4. ATSC Tuner
This connection port is for connecting digital cable or high definition antennas.
The tuner will tune to unscrambled digital cable channels or over the air wave high
definition local channels. This connection port uses coaxial cable.
5. Headphone Out
This connection port is for people who want to use a headphone with the TV. The
connection port uses a 3.5mm mini-jack audio cable.
6. IR Connector
This connector receives remote control commands from the display panel's IR
sensor and has to be permanently connected. This connection uses propriety cable.
7. PC Audio In
This connection port is for people who want to provide audio to the TV when using
devices such as PC or set-top box with a DVI output. The sources it provides
audio for are HDCP, DVI, VGA-PC, or VGA-YPbPr2. For PC connection you
would plug the provided 3.5mm mini-jack audio cord into your PC sound card and
this port. For A/V devices such as DVI set-top box or DVI DVD player, you
would use a RCA red/white to 3.5mm mini-jack cable for audio.
8. HDMI (High Definition Capable)
This connection port receives audio and high definition signal through one single
cable. It also doubles as HDCP source and DVI source with the provided HDMI
Page22 SCEPTRE X42