Sceptre X42GV-Naga User Manual page 18

Side View
About control keys
Press CH buttons to switch between preprogrammed channels. If you are
using DTV to view your television you can also use EPG button to
navigate your channels.
Press VOL buttons to adjust the audio volume.
Press this button to select among the following PC or DTV inputs – DTV,
HDMI-1 (HDMI, HDCP, DVI), HDMI-2 (HDMI, HDCP, DVI), VGA-PC,
VGA-YPbPr2. Please note HDMI, HDCP, and DVI are physically shared
under the same HDMI port. The unit can automatically detect the input
signal and port you use for connection and display on the screen. Please
also note that the VGA port can be used as a second Component (YPbPr)
port via the optional VGA-> Component (YPbPr) cable.
Press this button to select among the following Video inputs – TV, AV1,
AV2, YPbPr1 (Component).
Power on/off – Please note this is a passive power button and doesn't
physically cut power off the TV but turn the TV into standby mode. When
turning LCD on/off, wait 5-10 seconds before pressing the power button
again.
Page18 SCEPTRE X42