Wireless Security Setup - Sapido GR-1222 User Manual

4. Preamble Type
PLCP is Physical layer convergence protocol and PPDU is PLCP protocol data
unit during transmission, the PSDU shall be appended to a PLCP preamble and
header to create the PPDU. It has 2 options:
Preamble.
5. IAPP
Inter-Access Point Protocol is a recommendation that describes an optional
extension to IEEE 802.11 that provides wireless access-point communications
among multivendor systems.
6. Protection
Please select to enable wireless protection or not.
7. Aggregation
Enable this function will combine several packets to one and transmit it. It can
reduce the problem when mass packets are transmitting.
8. Short GI
Users can get better wireless transmission efficiency when they enable this
function.
9. RF Output Power
Users can adjust RF output power to get the best wireless network
environment. Users can choose from 100%, 70%, 50%, 35%, and 15%.
10. Apply Changes & Reset
Click on Apply Changes to save the setting data. Or you may click on Reset
to clear all the input data.
5.2.3
4 encryption types could be selected here, please follow below instructions for the
setting.
http://www.sapido.com.tw

Wireless Security Setup

Long Preamble and Short
85
User' s Manual V1.0